How to Clean Dirt Bike Plastics? | A Complete Beginner’s Guide

Dirt bikes are particularly designed for dirt trails, which means your vehicle is always on the verge of being clogged with mud and dust.

Treating the scuffed plastic of a dirt bike is essential if a rider is interested in restoring the appearance of his dirt bike. A neat and clean bike looks like new, and it urges a rider to chase paths with more confidence. Most of you have noticed that the plastic of the dirt bike starts looking ugly after some rides; then how could you prevent it from getting old soon? The simple answer is “Maintenance.”

Here, the maintenance of a dirt bike doesn’t mean that you need to deal with the components, but it depicts the regular cleaning of the plastic. Now, you might think that cleaning requires some costly cleaning agents, but that’s not always the case. You can even start cleaning with the simplest method and with the items that you already have in your home.

Although clogged dirt bike plastics are a common problem, but still most of you haven’t experienced cleaning and maybe pondering over how to clean dirt bike plastics. So, we have gathered all the information that would help you in the cleaning process.

Go ahead and read with us!

How to Clean Dirt Bike Plastics?

If you are frustrated about cleaning your dirt bike, then you would surely be happy to hear that dirt bikes need little effort, and there are a lot of the least expensive methods that you can utilize. You don’t need to be professional in this field because all the methods are quite simple to apply.

So, let’s start reading about the method of cleaning dirt bike plastics. Here is a list of required equipment that you need throughout the process:

  1. Toothbrush
  2. Sponge
  3. Baking soda
  4. 2 buckets of warm water
  5. Scraper
  6. Dishwasher
  7. Citrus cleaning agent
  8. Soft cloths

Once you collect all the tools, then you can move forward toward the steps. Follow the next content to read them one by one!

Steps To Clean Dirt Bike Plastics

Here we are going to instruct you on the cleaning process of dirt bike plastics. Give them a read!

Step 1: Make the Plastics Clean

Before starting cleaning with some cleaning agent, it is good to wash the plastics with water to remove the grime, dirt, and mud from the upper surface. This step is essential if you want to make the plastics look new.

If the plastics are highly clogged with mud, then you can scrub the surface with an old toothbrush. After scrubbing, you can use a hose to remove the dust properly.

Step 2: Scrub the Plastics to Remove Stains

Now, it’s time to remove the stains from the plastics. Stains are commonly found on dirt bike plastics, and removing them is crucial. Grease stains are tough to remove, but you can easily clean the surface by scrubbing the area with baking soda.

Baking soda acts as a good cleaning agent for grease stains. Moreover, if you want extraordinary results, then you can add a spoonful of vinegar to baking soda. Then apply this mixture to the stained area. It will take minutes to vanish the effect of grease stains completely.

Step 3: Remove the Rust with A Branded Cleaning Agent

Rust is one of the major issues with most dirt bikes, and without removing rust, no one could get the best cleaning results.

So, if there is rust on the bike components, then you can use alcohol as a cheap cleaning agent. But for instant results, Wd40 is considered an incredible cleaning agent. There are two methods to use these substances. You can either directly apply or spray them on the affected areas. Then after exposure to these substances, take a cloth or sponge to scrub the surface.

Step 4: Soak the Plastics in Warm Water Buckets

Take two buckets of warm water and then add dishwasher or dish soap to it, make a mixture, and then soak the plastics in it.

Place the plastics for a few hours in the solution if you want magical results. If you don’t need much cleaning, then soaking for a few minutes can also work. All the gunk and dirt will vanish after rinsing the plastics with lukewarm water.

Step 5: Dry the Parts Off

Once you remove all the possible substances from the plastics that were the cause of dirty plastics, then rinse them with water and, after that, let them dry.

You can place the plastics in the open air, or you can alternatively use an air compressor to dry them immediately.

Step 6: Paint the Plastics

Do you think that you are done with the cleaning process? NO!

To make your dirt bike look brand new, you have to paint the surface of the plastics as well. You can choose the color of your desire and then make a fresh coat over the surface.

If you are bad at hand painting, then use spray paint and then let it dry for proper fixing.

Step 7: Ride the Bike

Now, you are done with the whole process, and the bike is ready to go. Ride the bike and explore the new dirt trails.

Alternative Methods to Clean Dirt Bikes

Now, you are familiar with the general process of cleaning. In case you don’t want to go with this method, then there are some alternative ways as well. These techniques include:

  • Use a protectant to prevent the surface of plastics from harmful environmental effects. Acrylic protectants are the best to use.
  • To remove tough grime and dirt, it is suggested to use a degreaser.
  • If the plastic surface is scratched, then you can polish the surface with good paint.

Last Words

If you have a clogged dirt bike, cleaning is necessary. There are many methods you can use to remove the grease and dirt, and they all don’t require professional skills and can be easily done with simple products. There are specialized cleaners as well for dirt bikes that you can use according to your priority.

 Hopefully, now the cleaning of a dirt bike doesn’t sound complicated to you. Good luck!

Leave a Comment

Do not miss this experience!

Ask us any questions