How to Clean Dirt Bike Air Filters at Home – 6 Easy Steps

Have you ever noticed that your nostrils encompass thin hair-like structures that trap any debris or foreign agent and don’t allow it to move forward to the trachea, bronchi, and, most importantly, lungs? In this way, only clean air is permitted to your air passageway. 

Something more or less similar happens in dirt bikes. Dirt bikes and all other automobiles come with a special sac-like structure known as an air filter. Like hair in the nostrils, the purpose of these air filters is to filter out or shun the entry of unwanted particles in the air before they make their way to the bike’s engine. Thus, only clean and pure air is allowed to move inside, which boosts combustion and enhances smooth and efficient power delivery. 

Even if you couldn’t understand how air filters are analogous to our noses or nostrils, you would have understood that air filters play an inevitable role in the working machinery of dirt bikes. Thus, we must take good care of air filters and clean them more often. 

While most people do know the importance of air filters, they have little knowledge of how to clean dirt bike air filters. Through this article, we will teach them the most effortless method of cleaning the air filters of dirt bikes.

Here are the 6 steps on How to clean dirt bike air filters

Let’s begin our journey!

1. Gather All Items You Will Need in the Cleaning Process

Whenever you clean your nose or get ready to take a bath, you bring bathing essentials like shampoo, shower gel, body soap, hair conditioner, hand wash, face wash, and towel to one place so that you won’t have to call out your mother for giving you one thing or the other. 

The same you need to do when cleaning the air filters of your dirt bike. For cleaning air filters, you must have gloves, turpentine oil, detergent, zip-lock plastic bags, filter oil, and grease. 

2. Wipe the Air Filter with a Damp Cloth 

After combining all the materials needed in the process, go near the air filter and remove it. Put on your gloves and clean the inside of the filter with the help of a damp cloth. This will prevent dirt from entering the intake. 

In worst-case scenarios, air filters are covered by oil particles. It means that you need to be extra careful when dealing with it. Don’t remove it with bare hands. Removing the filter will also provide you with time to check if it is damaged or not. 

3. Remove the Old Oil by Adding Turpentine 

Turpentine is a volatile pungent oil that is extracted from pine wood or gum turpentine. This oil fragments the old oil present in the air filter and makes the cleaning process super-efficient. 

So the next thing you need to do is add a few drops of turpentine oil into the filter. Allow it to spread evenly, then squish the air filter until all the liquid is gone through it. If you see any remnants, squeeze the filter so that none remains. Depending on the condition of your air filter, you may need to repeat this process several times! 

4. Wash Air Filter with a Dishwashing Liquid or Detergent 

With the help of a few drops of dishwashing liquid or detergent, wash the air filter. The detergent will eat away the debris and provide you with a squeaky-clean air filter. Don’t rush the process. Let your filter dry completely before you refill it with the new oil. 

5. Refill the Filter with New Oil 

Once the filter is completely dry and no spot of water is left in the filter, start refilling the filter with new oil. To make the environment less messy, most riders refill the oil with the help of zip-lock plastic bags that are large enough to tie a knot too. This is not something you have to do while refilling the oil, but it is better to do it to avoid mess and clutter. 

6. Reinsert the Air Filter After Greasing it

It is always safe to grease the corners of the cage, rims, or housing before reinstalling the air filter to prevent dust and dirt from entering the filter and to maintain a tight seal. 

Greasing is one of the last things you need to do. After that, reattach the filter into its place with the help of screws, put its cover over it, and you are done with the job. At this point, it is good to restart the bike to check how it sounds. If the sound is unusual or ear-piercing, then you need to repeat the whole process. 

Final Statement 

Cleaning the air filters of dirt bikes is a tiresome procedure that requires a lot of time and patience, but it is not something you can’t do at home without any help. In this article, we have discussed one of the easiest methods about how to clean dirt bike air filters at home. 

Hopefully, you will find the writing valuable. If you have anything to say, don’t hesitate. Type your message below. We would love to get in touch with you! 

Leave a Comment

Do not miss this experience!

Ask us any questions