How Tight Should A Dirt Bike Chain Be? | A Complete Guide

Introduction How Tight Should A Dirt Bike Chain Be

If you’re a dirt bike rider, then you are surely aware of the possible dangers that are associated with that particular type of riding. During the ride, a rider has to fulfill all the requirements that are mandatory to explore the world with a dirt bike.

Unlike other bikes, dirt bike needs a bit extra maintenance, and when it comes to precautions, then there are some important things a rider should pay attention to.

Although people prefer to ride over this because of the exceptional traction it provides, but it is also true that a dirt bike chain is enough to give them a shock while riding. How?

Just imagine you are going to start a dirt bike race with your friend. You are doing extremely well but suddenly jumping off the rear sprocket. Oh! That’s so sad! How can you prevent yourself from this worst situation? Simply by tightening the chain!

This might seem difficult to know how tight should a dirt bike chain be but trust it or not, that’s quite easy to grab!

In this article, we will tell you everything about the tightness of a dirt bike chain. After reading this, you will be able to understand how you can easily ride a dirt bike by tightening its chain.

Let’s go ahead without further delays!

How Tight Should A Dirt Bike Chain Be?

Tightening a dirt bike chain is one of the trickiest techniques. Most people think that tightening a chain is an easy task as they just have to rotate the chain around the sprocket clockwise. But that’s not as easy as they perceive!

How Tight Should A Dirt Bike Chain Be 2

Many circumstances contribute to making a dirt bike chain lost. For example, riding on rough surfaces where there are so many jumps and bumps, riding at high speed, and sometimes the suspension is not set properly. Whatever the reason is, you have to tighten the chain ultimately.

But the question is still unanswered how tight should a dirt bike chain be? 

As a general rule of thumb, the chain of the dirt bike shouldn’t be too tight or too loose. It should be moderately tightened so that there is no tension remaining when you check it with your hand or a tool like tape. And it must not be too loose to fall off easily.

How Tight Should A Dirt Bike Chain Be 3

A dirt bike chain should be 1.4 to 2 inches slack.

Now, you may ask the question, how can I measure the chain movement? Usually, this is mentioned in the manual what is the correct and suitable chain measurement for your dirt bike, and you can also find the tool which is best to measure the chain movement.

You should check out this relevant guide – How To Tighten Dirt Bike Spokes? | A Stepwise Guide

Moreover, among all the components of a dirt bike, the chain is always on the verge of damage, and it starts wearing out soon. When the chain is loose, then it can easily fall off the sprocket, and this ultimately makes the rider fall on the ground, which causes severe injuries.

Similarly, a too-tight chain is unacceptable for a good riding experience because it causes the bike clutch to drag. So, if you don’t want to compromise on the bike’s performance, then always be sure about the accurate tightness of the chain.

How Tight Should A Dirt Bike Chain Be 4

Here is another point that you should remember, a dirt bike chain gets noisy when it is too tight, especially when the bike is running at high speed.

A good dirt bike has a bit of movement in it, and you can check it with the help of your index finger.

Simply insert your index finger between the side plates of the chain. If the distance between the two plates ranges between 1/2″ to 3/4″, then your chain is accurate to work, but if the distance is more than the mentioned figure, then the chain is too loose, and you have to tighten it.

If this space is less, then you are surely dealing with a too-tight chain.

Why Should A Dirt Bike Chain Be Tight?

Have you ever wondered how a dirt bike could gain the best performance? If No, then we are here to help you out!

A dirt bike performs at its best when the power is transferred from the engine to the wheels without any loss. Do you think it’s always easy to transmit full power? No, if your dirt bike chain is not properly tightened, then there will be a loss of power which ultimately impacts the performance of the bike as well as the rider.

Why Should A Dirt Bike Chain Be Tight

When the chain of the dirt bike is loose, it depicts that the rear wheel has not received the full power from the engine.

Furthermore, when the rear wheel slows down, it may cause a jerk in the engine when the chain is not tight. But in normal conditions, the case is the opposite because the whole mechanism is going smoothly, and the bike is also working precisely.

One more point that is worth mentioning is to check the chain tightness in all gears so that movement remains smooth without any slack.

Final Statement

A dirt bike chain is one of the critical parts and has a lot of significance for a rider. A rider can’t even think about the best riding experience without a good bike chain because it is associated with the sprockets of the engine as well as the rear wheel of the motorcycle. This is the reason why the tightness of the dirt bike chain matters a lot.
Now that you have gotten the complete concept of how tight should a dirt bike chain be. 
Hopefully, this article will help you to get a better experience with your dirt bike next time!

Leave a Comment

Do not miss this experience!

Ask us any questions